极品少妇第一次偷高潮哇哇大,国产福利在线观看免费第一福利,国产综合av一区二区三区无码

UPS/EPS inverter single phase transformer

Product description：

1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.
2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.
3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.

Consult us

Detailed introduction

Product description:

1. The product converts the UPS inverter output voltage into the required load application voltage, thus providing the electric isolation between load and UPS.

2. The product is usually of the combination form of inductance and transformer and combines with the capacitance of output end, which acts as LC filter, making the output voltage reach sinusoidal waveform.

3. The short-circuit impedance voltage Ucc% of this kind of transformer is relatively high.

Technical parameters:

Technical Parameters of Inverter Transformer for UPS/EPS
	Item	Standard Value	Condition
1	Capacity	0.5KVA-500KVA
2	Voltage range	＜1000V
3	Insulation resistance	＞100M?	DC1000V
4	Dielectric strength	＜20mA	AC3.0KV 60s
5	Efficiency	≥97%	Full load
6	Noise	≤65dB	1m away from transformer
7	Temperature rise	≤125K	Full load, forced air cooling
8	Insulation class	Class H (180℃)
9	Connection mode	Dyn11
10	Short-circuit impedance	6-18%
11	Ambient temperature	0℃ - 35℃
12	Design standard	GBT10228

Technical Parameters of Reactor for UPS/EPS
	Item	Standard Value	Condition
1	Inductance value	0.1mH-10mH
2	Current range	＜1000A
3	Insulation resistance	＞100M?	DC1000V
4	Dielectric strength	＜10mA	AC3KV 60s
5	Noise	≤65dB	1m away from transformer
6	Temperature rise	≤125K	Full load, forced air cooling
7	Insulation class	Class H (180℃)
8	Ambient temperature	0℃ - 35℃
9	Design standard	GBT10229

上一條：UPS (EPS)