1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS. 2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform. 3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.
1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.
2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.
3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.
|
Technical Parameters of Reactor for UPS/EPS |
|||
|
Item |
Standard Value |
Condition |
|
|
1 |
Inductance value |
0.1mH-10mH |
|
|
2 |
Current range |
＜1000A |
|
|
3 |
Insulation resistance |
＞100M? |
DC1000V |
|
4 |
Dielectric strength |
＜10mA |
AC3KV 60s |
|
5 |
Noise |
≤65dB |
1m away from transformer |
|
6 |
Temperature rise |
≤125K |
Full load, forced air cooling |
|
7 |
Insulation class |
Class H (180℃) |
|
|
8 |
Ambient temperature |
0℃ - 35℃ |
|
|
9 |
Design standard |
GBT10229 |
|
|
|
UPS(EPS) |
All the public platformMobile official network